2.6 1.5 1.5 1.5 specifications dimensions recommended solder pattern viewing angle tolerance : ?0.2 (unit : mm) (unit : mm) ?1:duty1/10, 1khz ?2:duty1/5, 200hz ?3:reference part no. chip structure emitting color absolute maximum ratings (ta 125?) electrical and optical characteristics (ta 125?) power dissipation p d (mw) forward current i f (ma) peak forward current i fp (ma) reverse voltage v r (v) operating temperature topr( ?) storage temperature tstg( ?) forward voltage v f reverse current i r dominant wavelength d luminous intensity i v typ.(v) i f (ma) max. (a) v r (v) min.* 2 (nm) typ. (nm) max.* 2 (nm) i f (ma) min. ( mcd) ty p. (mcd) i f (ma) sml-z14vt(a) aigainp red 168 70 200 ?1 12 -40 to +100 -40 to +100 1.9 20 10 12 625 630 635 20 56 112 20 sml-z14ut(a) 615 620 625 112 224 sml-z14dt(a) orange 602 605 608 140 280 sml-z14yt(a) yellow 175 2.0 586 589 592 sml-z14mt(a) yellowish green 568 571 574 45 90 sml-z14ft(a) green 561.5 564 566.5 22.4 45 sml-z14pt(a) 557 560 563 11.2 22.4 sml-z14v4t red 189 70 200 ?1 12 -40 to +100 -40 to +100 2.0 50 100 12 625 630 635 50 140 280 50 s ml-z14u4t 615 620 6 25 280 560 s ml-z14d4t orange 602 605 608 355 710 sml-z14y4t yellow 2.1 587 590 593 sml-z14m4t yellowish green 569 572 575 112 224 sml-z14f4t green 562 565 568 71 120 sml-z14p4t 558 561 564 22.4 56 smlz14egt(a) ingan bluish green 120 30 100 ?2 5 -40 to +100 -40 to +100 3.3 20 10 5 519 528 536 20 710 1,100 20 SMLZ14BGT(a) blue 114 3.2 464 470 476 140 280 smlz14wbgaw(a) white 30 100 ?2 5 -40 to +100 -40 to +100 3.3 20 100 5 (x, y) (0.36, 0.36) 20 900 1,400 20 smlz14wbgbw(a) (x, y) (0.44, 0.40) smlz14wbgcw(a) (x, y) (0.30, 0.28) 1,400 2,200 smlz14wbgdw(a) (x, y) (0.34, 0.34) relative intensity (%) 10 10 20 20 40 50 70 80 40 50 70 80 0 50 100 50 100 0 30 60 90 30 60 90 scanning angle ( deg ) y x y x relative intensity (%) 10 10 20 20 40 50 70 80 40 50 70 80 0 50 100 50 100 0 30 60 90 30 60 90 scanning angle ( deg ) y x y x sml-z14x4t series / sml-z14(a) series smlz14 series scanning angle (deg) relative intensity (%) scanning angle (deg) relative intensity (%) 3.2 3.5 cathode index 2.4 2.8 1.9 1.8 sml-z1 series color type v u d y m f p e b wb sml-z1 series features ~ high brightness ~ 20/50ma guaranteed specifications ~ plcc2 package 3528(1411) 3.52.8mm(t=1.9mm) actual size 1/4 ? 2012 rohm co., ltd. all rights reserved. www. r ohm.com 2012.11 - rev.b data sheet
electrical characteristics curves sml-z1 series forward current-forward voltage luminous intensity-atmosphere temperature luminous intensity-forward current derating 100 2.4 2.2 2.0 1.8 1.6 1.4 10 forward voltage v f (v) forward current i f (ma) ta=25c 100 2.4 2.2 2.0 1.8 1.6 1.4 10 forward voltage v f (v) forward current i f (ma) ta=25c ? ? ? sml-z 14 vt(a) r sml-z 14 ut(a) r sml-z 14 dt(a) r sml-z 14 yt(a) r sml-z 14 mt(a) r sml-z 14 ft(a) r sml-z 14 pt(a) relative luminous intensity (a.u.) atmosphere temperature ta (c) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 100806040200-20-40 i f =20ma relative luminous intensity (a.u.) atmosphere temperature ta (c) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 100806040200-20-40 i f =50ma relative luminous intensity (a.u.) atmosphere temperature ta (c) 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 1.6 i f =20ma relative luminous intensity (a.u.) forward currenti f (ma) 0 1.0 2.0 3.0 4.0 706050403020100 ta=25c relative luminous intensity (a.u.) forward currenti f (ma) 0 1.0 1.5 0.5 706050403020100 ta=25c maximum forward currenti f (ma) ambient temperature ta (c) 0 10 20 30 40 50 60 70 80 100806040200-20-40 maximum forward currenti f (ma) ambient temperature ta (c) 0 10 20 30 40 50 60 70 80 100806040200-20-40 maximum forward current * ' (ma) ambient temperatureta (c) 40 30 20 10 -40 -20 0 20 40 60 80 120100 0 8 8 sml-z 14 vt(a) r sml-z 14 ut(a) r sml-z 14 dt(a) r sml-z 14 yt(a) r sml-z 14 mt(a) r sml-z 14 ft(a) r sml-z 14 pt(a) r r sml-z 14 vt(a) r sml-z 14 ut(a) r sml-z 14 dt(a) r sml-z 14 yt(a) r sml-z 14 mt(a) r sml-z 14 ft(a) r sml-z 14 pt(a) r r r sml-z 14 v 4 t r sml-z 14 u 4 t r sml-z 14 d 4 t r sml-z 14 y 4 t r sml-z 14 m 4 t r sml-z 14 f 4 t r sml-z 14 p 4 t r r sml-z 14 v 4 t r sml-z 14 u 4 t r sml-z 14 d 4 t r sml-z 14 y 4 t r sml-z 14 m 4 t r sml-z 14 f 4 t r sml-z 14 p 4 t r r sml-z 14 v 4 t r sml-z 14 u 4 t r sml-z 14 d 4 t r sml-z 14 y 4 t r sml-z 14 m 4 t r sml-z 14 f 4 t r sml-z 14 p 4 t r r r sml-z 14 v 4 t r sml-z 14 u 4 t r sml-z 14 d 4 t r sml-z 14 y 4 t r sml-z 14 m 4 t r sml-z 14 f 4 t r sml-z 14 p 4 t r r r sml-z 14 vt(a) r sml-z 14 ut(a) r sml-z 14 dt(a) r sml-z 14 yt(a) r sml-z 14 mt(a) r sml-z 14 ft(a) r sml-z 14 pt(a) 100 10 1 forward currenti f (ma) forward voltagev f (v) 2.5 3.0 3.5 4.0 ta=25c smlz 14 egt(a) r smlz 14 bgt(a) r smlz 14 wbgaw(a) r smlz 14 wbgbw(a) r smlz 14 wbgcw(a) r smlz 14 wbgdw(a) r r r smlz 14 egt(a) r smlz 14 bgt(a) r smlz 14 wbgaw(a) r smlz 14 wbgbw(a) r smlz 14 wbgcw(a) r smlz 14 wbgdw(a) r r r smlz 14 egt(a) r smlz 14 bgt(a) r smlz 14 wbgaw(a) r smlz 14 wbgbw(a) r smlz 14 wbgcw(a) r smlz 14 wbgdw(a) r r smlz 14 egt(a) r smlz 14 bgt(a) r smlz 14 wbgaw(a) r smlz 14 wbgbw(a) r smlz 14 wbgcw(a) r smlz 14 wbgdw(a) 1.5 0 0.5 1.0 relative luminous intensity (a.u.) forward currenti f (ma) 0 5 10 15 302520 ta=25c e.5 0rel1errativr umnrosymr(aaru)fwsdrucdcumcym www. r ohm.com anta(ttr5rchz(3
sml-z1 series rank reference of brightness red (v, u) ? please note that the brightness of some products may fall between ranks (half rank). orange (d) yellow (y) green (m, p, f) bluish-green (e) blue (b) white (wb) package structure package size height (mm) luminous intensity (mcd) i f (ma) am an ap aq ar as at au av aw ax ay az ba bb bc bd be 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 plcc2 3528 1.9 20 sml-z14vt(a) sml-z14v4t 50 sml-z14ut(a) sml-z14u4t package structure package size height (mm) luminous intensity (mcd) i f (ma) ag ah aj ak al am an ap aq ar as at au av aw ax ay az 9 to 11.2 11.2 to 14 14 to 18 18 to 22.4 22.4 to 28 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 plcc2 3528 1.9 20 sml-z14mt(a) sml-z14pt(a) sml-z14ft(a) 50 sml-z14m4t sml-z14p4t sml-z14f4t package structure package size height (mm) luminous intensity (mcd) i f (ma) am an ap aq ar as at au av aw ax ay az ba bb bc bd be 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 plcc2 3528 1.9 20 sml-z14dt(a) 50 sml-z14d4t package structure package size height (mm) luminous intensity (mcd) i f (ma) s1 s2 t1 t2 u1 u2 v1 v2 w1 w2 x1 x2 y1 y2 z1 z2 90 to 110 110 to 140 140 to 180 180 to 220 220 to 280 280 to 360 360 to 450 450 to 560 560 to 710 710 to 900 900 to 1100 1100 to 1400 1400 to 1800 1800 to 2200 2200 to 2800 2800 to 3600 plcc2 3528 1.9 20 smlz14egt(a) package structure package size height (mm) luminous intensity (mcd) i f (ma) s1 s2 t1 t2 u1 u2 v1 v2 w1 w2 x1 x2 y1 y2 z1 z2 90 to 110 110 to 140 140 to 180 180 to 220 220 to 280 280 to 360 360 to 450 450 to 560 560 to 710 710 to 900 900 to 1100 1100 to 1400 1400 to 1800 1800 to 2200 2200 to 2800 2800 to 3600 plcc2 3528 1.9 20 SMLZ14BGT(a) package structure package size height (mm) luminous intensity (mcd) i f (ma) s1 s2 t1 t2 u1 u2 v1 v2 w1 w2 x1 x2 y1 y2 z1 z2 90 to 110 110 to 140 140 to 180 180 to 220 220 to 280 280 to 360 360 to 450 450 to 560 560 to 710 710 to 900 900 to 1100 1100 to 1400 1400 to 1800 1800 to 2200 2200 to 2800 2800 to 3600 plcc2 3528 1.9 20 smlz14wbgaw(a) smlz14wbgbw(a) smlz14wbgcw(a) smlz14wbgdw(a) package structure package size height (mm) luminous intensity (mcd) i f (ma) am an ap aq ar as at au av aw ax ay az ba bb bc bd be 28 to 35.5 35.5 to 45 45 to 56 56 to 71 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 355 to 450 450 to 560 560 to 710 710 to 900 900 to 1120 1120 to 1400 1400 to 1800 plcc2 3528 1.9 20 sml-z14yt(a) 50 sml-z14y4t 3/4 ? 2012 rohm co., ltd. all rights reserved. www. r ohm.com 2012.11 - rev.b
sml-z1 series part no. construction s m l z 1 4 y 4 t p t 8 6 dice classification code rank sign (chromaticity rank) ? (for white led and pastel color) series name package name chip type emitting color resin color taping specifications rank sign (brightness rank) ? v u d y f p b wb red:630nm red:620nm orange:605nm yellow:590(589)nm m yellowish-green: 572(571)nm green:565(564)nm green:561(560)nm e bluish-green: 528nm blue:470nm white pb pure green cb ice blue gb blue green sb sapphire blue ? ? will be taken out for emitting color w/b/e series and pastel color. 3 high brightness type 4 8 ultra high brightness type t transparent colorless w milkywhite t86 t87 1 cathode at sprocket hole side for white led and pastel color cathode at sprocket hole side anode at sprochet hole side ? concerning the rank sign. ? please refer to the rank chart above for luminous intensity classification. ? please refer to specification sheet for color classification. ? part name is individual for each rank. ? when shipped as sample, the part name will be a representative part name. general products are free of ranks. please contact sales if rank appointment is needed. packing specification rohm led products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. please contact the nearest sales office or distributer if necessary. 4/4 ? 2012 rohm co., ltd. all rights reserved. www. r ohm.com 2012.11 - rev.b
r1102 a www.rohm.com ? 2012 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes the information contained herein is subject to change without notice. before you use our products, please contact our sales representative and verify the latest specifica- tions : although rohm is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. rohm shall have no responsibility for any damages arising out of the use of our poducts beyond the rating specified by rohm. examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm or any other parties. rohm shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. the products are intended for use in general electronic equipment (i.e. av/oa devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. the products specified in this document are not designed to be radiation tolerant. for use of our products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a rohm representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. do not use our products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. rohm shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. rohm has used reasonable care to ensur the accuracy of the information contained in this document. however, rohm does not warrants that such information is error-free, and rohm shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. please use the products in accordance with any applicable environmental laws and regulations, such as the rohs directive. for more details, including rohs compatibility, please contact a rohm sales office. rohm shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. when providing our products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the us export administration regulations and the foreign exchange and foreign trade act. this document, in part or in whole, may not be reprinted or reproduced without prior consent of rohm. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14)
|
